1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Hemos actualizado nuestra PolĂ­tica de Privacidad acorde con la nueva RGPD. +Info // We've updated our Privacy Policy to comply with the GDPR. +Info
    Dismiss Notice

Biotechvore Area

Discussion in 'ITS' started by Commoner1, Jun 19, 2018.

  1. Commoner1

    Commoner1 Well-Known Member

    Joined:
    Nov 23, 2017
    Messages:
    97
    Likes Received:
    201
    Is it allowed to measure the size of a Biotechvore Area during deployment and player turns?
     
  2. macfergusson

    macfergusson Van Zant is my spirit animal.

    Joined:
    Dec 5, 2017
    Messages:
    882
    Likes Received:
    1,292
    Conveniently you are required to deploy an HVT outside of your deployment zone that you'll need to be measuring for...
     
    xagroth and Commoner1 like this.
  3. Commoner1

    Commoner1 Well-Known Member

    Joined:
    Nov 23, 2017
    Messages:
    97
    Likes Received:
    201
    Yeah, I know that trick. But Biotechvore is the current round in our ITS league and we have several newbies who struggle alot with this mission and I want to make it a bit easier for them.
     
  4. macfergusson

    macfergusson Van Zant is my spirit animal.

    Joined:
    Dec 5, 2017
    Messages:
    882
    Likes Received:
    1,292
    If you're running your own league for newbies, make a rule that the zone is marked out. Problem solved.
     
  5. Barrogh

    Barrogh Well-Known Member

    Joined:
    Nov 26, 2017
    Messages:
    1,331
    Likes Received:
    998
    Is that a "no"? :P
     
  6. Robock

    Robock Well-Known Member

    Joined:
    Nov 24, 2017
    Messages:
    505
    Likes Received:
    333
    that is what i was thinking, you have to deploy over 16" which is the same as the zone. and is how I was doing in in previous seasons. But looking at ITS 10 again as i'll play it soon i realize it is 4" further than your DZ, and with the DZ being reduced to 8" you only measure out to 12" for deploying the HVT. Unless you are allowed to measure the HVT placement so that he is exactly 16" from your board edge; although i think that would fall under the same as measuring that your warband is exactly 4" away from a specific building corner.
     
  7. DukeofEarl

    DukeofEarl Well-Known Member

    Joined:
    Nov 27, 2017
    Messages:
    555
    Likes Received:
    485
    You can measure for FD1/2 ranges though...even if you fail the confused deployment roll
     
    Robock likes this.