Gators

Tema en 'Nomads' iniciado por Tourniquet, 21 Mar 2022.

  1. Antares

    Antares Well-Known Member

    Registrado:
    21 Dic 2017
    Mensajes:
    131
    Me Gusta recibidos:
    388
    Well, not a big fan of the design to begin with, but the bulkiness fits imo. Looks very corregidor-ish to me, so that checks out.
     
  2. infyrana

    infyrana Well-Known Member

    Registrado:
    27 Jun 2019
    Mensajes:
    486
    Me Gusta recibidos:
    318
    I was just thinking 'oh it looks Ok to me, chunky and bulky all is fine and room for the pilot, maybe apart from the repeat poses' ....then I read more comments and finally saw the little arms from his torso and thought - nope, fail.

    So yeah, that little addition of arms to show the pilot really does not work in this proportion - worse than the other TAGs'. Easily fixable by removing them though. The gun in air pose to show off the model is getting a bit tiresome, is it really that hard to check out the Szalamandra model for ideas on neat poses?
     
    A LaughinGod le gusta esto.
  3. Vult ji

    Vult ji Well-Known Member

    Registrado:
    19 Mar 2022
    Mensajes:
    68
    Me Gusta recibidos:
    340
    My 2 cents.
    Sadly those arm/knee guards and shoulders really don't fit for me. If the "screws"were inside as we see in render it would be better.On the render i really liked the thick neck the "space suit coat" around it, it is absent on the model as far as i see. I like the bulkiness but i really hoped i would look more curvy than blocky. Weapon is ok , maybe a better pose. Lastly i am ok with lots of detail but minus the screws why the legs have more detail than the rest of the model. I mean we look it from above back & front mostly.
    I dont hate it but i like the render better :D, we shall see the live version.
     
    A Modock le gusta esto.
  4. chaos11

    chaos11 Well-Known Member

    Registrado:
    23 Nov 2017
    Mensajes:
    781
    Me Gusta recibidos:
    1.027
    I'll wait for the painted model, but definitely not as immediately impressed as I was with the dossier.
     
  5. theomc

    theomc Well-Known Member

    Registrado:
    15 Nov 2019
    Mensajes:
    269
    Me Gusta recibidos:
    216
    "I take cover behind this piece of terrain a block away."
    "You can't do that"
    "Well it's the closest I can fit the model to it..."
     
  6. Savnock

    Savnock Nerfherder

    Registrado:
    25 Nov 2017
    Mensajes:
    1.614
    Me Gusta recibidos:
    2.770
    Gonna wait for the painted model to judge, renders rarely do justice to the finished piece.

    Will probably just proxy with a Salamander if the Gator isn’t up to snuff.
     
  7. chromedog

    chromedog Less than significant minion

    Registrado:
    24 Nov 2017
    Mensajes:
    1.398
    Me Gusta recibidos:
    2.715
    I don't mind the design as a starting point - I will be modifying mine when I get it (because I don't like the look of that articulated ... whatever ... that joins the gun to the body.)
     
  8. dhellfox

    dhellfox The keeper of the Forgotten

    Registrado:
    21 Sep 2019
    Mensajes:
    709
    Me Gusta recibidos:
    626
    its the blackjack all over again XD
     
    A Lucian y LaughinGod les gusta esto.
  9. Space Ranger

    Space Ranger Well-Known Member

    Registrado:
    27 Abr 2018
    Mensajes:
    6.952
    Me Gusta recibidos:
    6.310
    Well it IS Nomad. The probably took him apart, and fully cyborg-ed him.
     
  10. archangeleong

    archangeleong Deadly Ninja Assassin

    Registrado:
    7 Jul 2018
    Mensajes:
    1.140
    Me Gusta recibidos:
    6.879
    So the mini is finally revealed and looks much better than the 3D render. However why is the pose so awkward?

    upload_2022-9-16_17-4-8.png
     
    A Lady Numiria, csjarrat y burlesford les gusta esto.
  11. csjarrat

    csjarrat Well-Known Member

    Registrado:
    24 Nov 2017
    Mensajes:
    1.790
    Me Gusta recibidos:
    1.917
    It's gonna be a bitch to transport!
     
    A Savnock le gusta esto.
  12. Savnock

    Savnock Nerfherder

    Registrado:
    25 Nov 2017
    Mensajes:
    1.614
    Me Gusta recibidos:
    2.770
    I don’t think the pose is that bad: it emphasizes the action of the additional support arm for the gun, which is pretty cool. I’m normally not a fan of minis one-handing long guns (even big servo-armored troops), but this one is pretty decent.

    That said I’ll probably try to give it a firing pose.

    The good thing about Siocast is that it’s easily convertible.
     
    A Hecaton le gusta esto.
  13. infyrana

    infyrana Well-Known Member

    Registrado:
    27 Jun 2019
    Mensajes:
    486
    Me Gusta recibidos:
    318
    I wonder if this could work ... cut at the red line, attach the bit pointed out by the blue arrow to the spot where the black arrow points. Puts the gun in a more vertical position, changes the weight distribution to a little better balance, but places the hand at an awkward angle.

    upload_2022-9-16_20-18-47.png
     
    A Time Bandit le gusta esto.
  14. Savnock

    Savnock Nerfherder

    Registrado:
    25 Nov 2017
    Mensajes:
    1.614
    Me Gusta recibidos:
    2.770
    Might work @infyrana .

    If your options doesn't work you could still do this: Rotate the gun arm inwards and bring up the fist from the other side, putting a handle on the gun housing so that the fist can be holding it. That's what I'm thinking about doing, might require similar cuts so you could always start with your idea, then play round with it.

    If all else fails, make -several- cuts at joints and reposition a lot more easily.
     
    A infyrana le gusta esto.
  15. AmPm

    AmPm Well-Known Member

    Registrado:
    3 Nov 2019
    Mensajes:
    737
    Me Gusta recibidos:
    1.412
    The render was so ugly I bought 2 TAGs to convert a Gator. Now that the actual model is shown I feel like I got my money's worth from the conversion. That thing is hideous.
     
    A Modock le gusta esto.
  16. SaladSnek

    SaladSnek Well-Known Member

    Registrado:
    6 Mar 2021
    Mensajes:
    57
    Me Gusta recibidos:
    56
    I like my lizard as a gator as I enjoy imagining the robot claws crackling with E/M as the little guy runs up the table.

    If I were to get this model though, I think I'd try to fold the MHMG into a stowed position and put a storm hammer or something in that hand.
     
  17. archangeleong

    archangeleong Deadly Ninja Assassin

    Registrado:
    7 Jul 2018
    Mensajes:
    1.140
    Me Gusta recibidos:
    6.879
    theomc, Wizzy, Errhile y 6 otros les gusta esto.
  18. Golem2God

    Golem2God Just a Kooky Kumotail serving others.

    Registrado:
    25 Nov 2017
    Mensajes:
    3.884
    Me Gusta recibidos:
    2.976
    Thank you very much for the tutorial and conversion details Archangel.
     
    A archangeleong le gusta esto.
  19. archangeleong

    archangeleong Deadly Ninja Assassin

    Registrado:
    7 Jul 2018
    Mensajes:
    1.140
    Me Gusta recibidos:
    6.879
    No problem. It’s worth doing
     
    A Daireann y Golem2God les gusta esto.
  20. Daireann

    Daireann Well-Known Member

    Registrado:
    21 Mar 2020
    Mensajes:
    583
    Me Gusta recibidos:
    869
    Indeed! Looks better. I still have doubts about some moments in this tag, but it is good to see everything are fixable.

    I am feeling pain when thinking about Chernobog. It's legs connection with body makes me think, that it would brake right after the first step...

    But that is another question. Thank you for gator conversion with a taste of hope T_T
     
    A Golem2God, Errhile y archangeleong les gusta esto.
  • About Us

    We are a company founded in 2001 in Cangas (Spain), and devoted to design and manufacture games and figures. Our main product, Infinity the Game, was born with the ambition to satisfy the most demanding audience, offering the best quality.

     

    Why are we here?

     

    Because we are, first and foremost, players.

  • Quick Navigation

    Open the Quick Navigation