Conversion thread! what've you got going on?

Tema en 'Miniatures' iniciado por Pierzasty, 23 Nov 2017.

  1. Ugin

    Ugin Well-Known Member
    Warcor

    Registrado:
    14 Feb 2018
    Mensajes:
    543
    Me Gusta recibidos:
    2.144
    Refreshing the thread!

    Bandit with some face mods
    [​IMG]

    Lynx has gone rogue
    [​IMG]
     
    LeGweg, Abrilete, Danger Rose y 18 otros les gusta esto.
  2. Erbent

    Erbent Well-Known Member

    Registrado:
    23 Nov 2017
    Mensajes:
    135
    Me Gusta recibidos:
    184
    Finally settled on a color scheme for my CA and converted up my old Sheskiin somewhat recently, her spear was an absolute pain for transportation so I changed it for a spitfire from a spec-ops, and added a hair from an AoS daughters of khaine kit.
    [​IMG] [​IMG]
     
    Daaz, Abrilete, dulydude y 6 otros les gusta esto.
  3. toadchild

    toadchild Premeasure

    Registrado:
    22 Feb 2017
    Mensajes:
    4.268
    Me Gusta recibidos:
    8.102
    I agree that the spear was problematic, but for some reason I only ever considered CCW swaps instead of just adding a firearm.
     
  4. Erbent

    Erbent Well-Known Member

    Registrado:
    23 Nov 2017
    Mensajes:
    135
    Me Gusta recibidos:
    184
    I had to carefully cut off the handle of her spear to fit in the spitfire's handle and bend her thumb to make the hand grip the spitfire properly, but other than that it wasn't too difficult to change the spear for a spitfire.
     
    A toadchild le gusta esto.
  5. toadchild

    toadchild Premeasure

    Registrado:
    22 Feb 2017
    Mensajes:
    4.268
    Me Gusta recibidos:
    8.102
    Inspired by @TheDiceAbide and others, I made an Anaconda with an underslung HMG. I used the scabbard as the basis for the barrel, and then built a receiver, magazine, and muzzle around it. I also lowered the angle of the sword arm (and its corresponding pilot arm) to de-emphasize it in the pose. Finally, I made the sword lightly curved like a saber or katana, because I did not like the aesthetic of a straight single-edged sword.

    655651D1-5B3C-4AE1-AEA9-1CF82B7CAC0D.jpeg E5EA727B-67B2-4645-BB28-AC34C681FCE1.jpeg 8BA4095C-E59C-4A8B-878C-E25B4004DE00.jpeg
     
    LeGweg, Abrilete, Silas7 y 21 otros les gusta esto.
  6. TheDiceAbide

    TheDiceAbide Thank you for your compliance.
    Warcor

    Registrado:
    23 Nov 2017
    Mensajes:
    962
    Me Gusta recibidos:
    3.170
    And I approve!
     
    A Abydog, toadchild y Golem2God les gusta esto.
  7. Nuada Airgetlam

    Nuada Airgetlam Nazis sod off ///

    Registrado:
    26 Ene 2018
    Mensajes:
    3.071
    Me Gusta recibidos:
    3.019
    NICE.
     
    A toadchild y Golem2God les gusta esto.
  8. KGG

    KGG Well-Known Member

    Registrado:
    4 Jun 2019
    Mensajes:
    222
    Me Gusta recibidos:
    631
    Had a go at a few conversions from spare models. First time really using greenstuff for anything more than gap filling. Weapons were borrowed from other CB models or 3D printed at Monstrous Makings.
    For some reason a second-hand alguacile came with a clipped off interventor head, so I did what I could.

    73F00C14-5FB9-44D7-A676-33299947919F.jpeg

    97483312-6755-4949-98A5-3B3B622B5EC3.jpeg

    F8CCE567-E6E2-4190-AB30-1E36E2A833B4.jpeg
     
    Daaz, Abrilete, Silas7 y 16 otros les gusta esto.
  9. Willen

    Willen Well-Known Member

    Registrado:
    26 Nov 2017
    Mensajes:
    536
    Me Gusta recibidos:
    747
    Those are really good, especially the Alguacile Hacker!
     
    Errhile, Golem2God, Bors y otra persona les gusta esto.
  10. ogrekin

    ogrekin Vet. Kazak
    Warcor

    Registrado:
    28 Mar 2018
    Mensajes:
    41
    Me Gusta recibidos:
    75
    Bearpode anyone?
    20210401_215002.jpg
     
    Crazy Prophet, LeGweg, Modock y 19 otros les gusta esto.
  11. ogrekin

    ogrekin Vet. Kazak
    Warcor

    Registrado:
    28 Mar 2018
    Mensajes:
    41
    Me Gusta recibidos:
    75
    Now with a quick paint job.
    20210402_171741.jpg
     
    Crazy Prophet, LeGweg, wisefaiz y 15 otros les gusta esto.
  12. Snowball

    Snowball Well-Known Member
    Warcor

    Registrado:
    14 Abr 2018
    Mensajes:
    128
    Me Gusta recibidos:
    668
    I got a new 3D printer and I am addicted to it!

    D5446870-3C80-4C7B-AB73-4CD567F8994D.jpeg 12AE82DB-AA50-4972-80A7-99A786384280.jpeg
     
    Abrilete, miguelbarbo84, Silas7 y 10 otros les gusta esto.
  13. Tristan228

    Tristan228 Bakunin's best Morlock trainer
    Warcor

    Registrado:
    23 Nov 2017
    Mensajes:
    1.254
    Me Gusta recibidos:
    2.518
    I made a helmet for my Qiang Gao out of Milliput which I formed with a hot glue mold
    20210406_175019.jpg

    20210406_174946.jpg
     
    Abrilete, Ugin, Ben Kenobi y 10 otros les gusta esto.
  14. borisgreymenace

    borisgreymenace killer heckler

    Registrado:
    16 Oct 2019
    Mensajes:
    114
    Me Gusta recibidos:
    208
  15. Tristan228

    Tristan228 Bakunin's best Morlock trainer
    Warcor

    Registrado:
    23 Nov 2017
    Mensajes:
    1.254
    Me Gusta recibidos:
    2.518
    I got the idea from this video, at 2:40 min (literally minutes before I started chopping up the real helmet):

    And it's explained well, I got my result after the first try.
     
    #1995 Tristan228, 7 Abr 2021
    Última edición: 7 Abr 2021
  16. Andoman

    Andoman Active Member

    Registrado:
    31 Dic 2017
    Mensajes:
    15
    Me Gusta recibidos:
    35
    Reposing and Remodeling a giant mecha samurai

    Next step is to sculpt some segmented plates on the arms beneath the shoulder pads.

    IMG_20210408_190518.jpg IMG_20210408_190411.jpg IMG_20210408_190354.jpg IMG_20210408_190854.jpg

    Next step: wait for head crest to fully cure then add another layer to create a more defined shape.

    What do u guys thing so far? c&c welcome!
     
    #1996 Andoman, 8 Abr 2021
    Última edición: 9 Abr 2021
    Silas7, HellLois, Errhile y 10 otros les gusta esto.
  17. Sergei Simonov

    Sergei Simonov Well-Known Member

    Registrado:
    2 Dic 2017
    Mensajes:
    107
    Me Gusta recibidos:
    654
    I have lost track of how many times I have rebuilt this SOB so I finally took a hacksaw to it and am happy with the results.

    Avatar 3.jpg Avatar 2.jpg Avvie.jpg
     
    Daaz, Abrilete, lazovchik y 18 otros les gusta esto.
  18. Fed4ykin

    Fed4ykin Well-Known Member

    Registrado:
    3 Dic 2019
    Mensajes:
    516
    Me Gusta recibidos:
    1.087
    But what is it? Looks great and the paint job is making it even better.
    It looks rather alien wit the xeodrons head so I guess it is something for the combined army.
     
  19. Sergei Simonov

    Sergei Simonov Well-Known Member

    Registrado:
    2 Dic 2017
    Mensajes:
    107
    Me Gusta recibidos:
    654
    It was a Lizard, now it's an Avatar
     
    A Abydog, Fed4ykin y Golem2God les gusta esto.
  20. Sergei Simonov

    Sergei Simonov Well-Known Member

    Registrado:
    2 Dic 2017
    Mensajes:
    107
    Me Gusta recibidos:
    654
    Also finishing up some other lesser conversions-- turning wormbots into ravenous alien squidbeasts to use as taighas for instance, and not liking morat aesthetics I chose to use Umbras as Witch Soldiers, I just tried to make them a little witchier

    Side note: minimising the iris tends to produce much better photos on a black background first contact.jpg
     
    Daaz, Abrilete, lazovchik y 10 otros les gusta esto.
  • About Us

    We are a company founded in 2001 in Cangas (Spain), and devoted to design and manufacture games and figures. Our main product, Infinity the Game, was born with the ambition to satisfy the most demanding audience, offering the best quality.

     

    Why are we here?

     

    Because we are, first and foremost, players.

  • Quick Navigation

    Open the Quick Navigation