1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Archangeleong's Armies Log

Discussion in 'Miniatures' started by archangeleong, Jul 9, 2018.

  1. archangeleong

    archangeleong Deadly Ninja Assassin

    Joined:
    Jul 7, 2018
    Messages:
    1,136
    Likes Received:
    6,829
    INFINITY NOMADS TUNGUSKA: Zondnautica

    [​IMG]

    Fast Offensive Unit Zondnautica
    The reason why I wanted to do Nomads was this guy. I just love this mini set, it's so cool. I was careful to make sure I matched all the colours between the different modes (If you look carefully at the studio models there is a bit of a mismatch). Not sure why some of the leg armour is missing in robot mode, nor where the collar on the rider goes when she is dismounted. Anybody have any idea?

    Even though this is a Tunguskan unit I just had to add more red than black this time as red bikes just go faster. I also wanted the armour panels to stand out easily from the under armour in the robot mode and the red really sells this. There were lots of cool shiny textures to paint, which was laborious but satisfying to finish. One tricky part was doing the tires so they look like rubber compared to the shiny metallic bits. To that end I drybrushed them as well as picked out the edge highlights. Overall, very satisfying miniatures to paint.

    Zondnauta (Spitfire)
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Zondnauta (Spitfire), Dismounted
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Zondmate

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Team
    [​IMG]
    [​IMG]
     
  2. archangeleong

    archangeleong Deadly Ninja Assassin

    Joined:
    Jul 7, 2018
    Messages:
    1,136
    Likes Received:
    6,829
    INFINITY NOMADS TUNGUSKA: Hollow Men Link Team

    [​IMG]
    Hollow Men Link Team
    Insectlike, inhuman, deadly and hollow. These guys look they mean business. I took my time with them to bring out the different textures of black. Pleasure to paint and satisfying to finish. These guys finished off my first round of Tunguska for the moment...

    Combi Rifle
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Spitfire
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Boarding Shotgun
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Missile Launcher
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Full Team
    [​IMG]


     
  3. Capo.Paint

    Capo.Paint Well-Known Member

    Joined:
    Feb 14, 2018
    Messages:
    253
    Likes Received:
    327
    If not the models themselves, then your great paintjobs let me fall in love with Tunguska! Really great work with the red and the white here!
     
  4. Law Dawg

    Law Dawg Well-Known Member

    Joined:
    Jan 2, 2020
    Messages:
    233
    Likes Received:
    460
    The textures you added to the clothes and holster really differentiate them from the material of the armour.
     
  5. archangeleong

    archangeleong Deadly Ninja Assassin

    Joined:
    Jul 7, 2018
    Messages:
    1,136
    Likes Received:
    6,829
    Thanks guys. I did a lot of study and preparation to make this dark coloured army interesting and stand out.
     
    Xeurian likes this.
  6. Sangarn

    Sangarn TRIUMcorp CEO
    Warcor

    Joined:
    Mar 3, 2018
    Messages:
    856
    Likes Received:
    1,531
    Your stuff is top level as always but imo your blue OSL might be a little too weak, but I might be biased because your color scheme look a lot like mine ^^ and I do a lot more trashy blue OSL
    did you tried the fluo stuff from vallejo ? I really like those for lights
     
  7. Law Dawg

    Law Dawg Well-Known Member

    Joined:
    Jan 2, 2020
    Messages:
    233
    Likes Received:
    460
    I've been eyeing those for bright green lights. What are they like?
     
  8. archangeleong

    archangeleong Deadly Ninja Assassin

    Joined:
    Jul 7, 2018
    Messages:
    1,136
    Likes Received:
    6,829
    It’s true I never really go too bright with osl. Depends if you want it to stand out a lot. My taste is for weak osl, as I imagine my minis to be sunlit, so bright osl wouldn’t be natural. The studio models are painted similarly.

    Another reason I don’t do too bright is that I’m just not that confident on doing full on osl lighting lol (plus a bit too lazy to do more wet blending in a mini). I’m trying to improve each time I do it and am happy enough, but one of these days I want to work on a night lit army and do a bit more crazy and full on osl (plus use some fluoro paint I got lying around not being used)
     
    jherazob and Sangarn like this.
  9. archangeleong

    archangeleong Deadly Ninja Assassin

    Joined:
    Jul 7, 2018
    Messages:
    1,136
    Likes Received:
    6,829
    INFINITY NOMADS TUNGUSKA: Grenzer (Multi Sniper Rifle)
    [​IMG]
    Grenzer, Grenz Security Team (Multi Sniper Rifle)
    So I didn't plan on expanding my Tunguska army anytime too soon, but a couple of stragglers popped in a the last minute. I'm quite fond of the Grenzer sniper. I think its his goggle eyes that I like. I kept him dark like my other guys, but he isn't too different from the studio colours. Overall a quick simple model to paint.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
    redeemer, Vakarian, Usashi and 9 others like this.
  10. Croepoek

    Croepoek Well-Known Member

    Joined:
    Jan 2, 2018
    Messages:
    321
    Likes Received:
    427
    Love the eyes and OSL effect. Would you mind sharing how you approach that?
     
  11. maru

    maru Well-Known Member

    Joined:
    Nov 26, 2017
    Messages:
    905
    Likes Received:
    1,571
    this mini reminds me of Deus ex on mods ...
     
  12. archangeleong

    archangeleong Deadly Ninja Assassin

    Joined:
    Jul 7, 2018
    Messages:
    1,136
    Likes Received:
    6,829
    Completely lol nuts! But looks like Grenzer for a moment lol!
     
  13. archangeleong

    archangeleong Deadly Ninja Assassin

    Joined:
    Jul 7, 2018
    Messages:
    1,136
    Likes Received:
    6,829
    Sure no problem.

    I use only 2 colors:

    Vallejo MC Blue Green
    Vallejo GC Verdigris

    Steps (for eye):
    1. Wash blue green over whole area including inside socket
    2. Paint blue green over whole eye
    3. Mix 50/50 blue green/Verdigris and stipple paint over 80% of eye.
    4. Paint 50/50 mix highlight to edge of socket on bottom half to show light reflection.
    5. Stipple paint pure Verdigris to middle of eye.

    hope this makes sense :-)
     
    Croepoek likes this.
  14. archangeleong

    archangeleong Deadly Ninja Assassin

    Joined:
    Jul 7, 2018
    Messages:
    1,136
    Likes Received:
    6,829
    NON-METALLIC METAL STEEL PAINTING GUIDE: Zondnautica
    [​IMG]

    NNM Steel Painting Guide
    So I'm a bit of a beginner when it comes to non-metallic metal painting. However, I wanted to give it a shot on my Infinity minis and I started practicing the technique on my JSA models about three years ago (wow three years into Infinity now!). In the past, working on GW models, I preferred to paint metallic metals, however the techniques are fairly similar. If you paint steel, you only have to replace the metallic silver paints with greys and in both techniques white and black are used as extreme highlights and shadows. One thing I did improve upon over the past was thinking about a light source and how it hits a surface and I tend to think about this more when painting NNM metallic parts.

    Although I don't consider myself an expert on NNM technique, I have gained some mastery in the last three years and I decided to put together a tutorial to share my experience, largely because Oni on the forum asked me how to do it. Apologies Oni for the late response! The subject of the tutorial will be applying NNM to the steel parts in seven stages to the Zondnautica motorbike.

    If you are interested please check out the full painting guide on my blog here.

    The finished model is here.
     
    ev0k, Oni, RAF and 7 others like this.
  15. archangeleong

    archangeleong Deadly Ninja Assassin

    Joined:
    Jul 7, 2018
    Messages:
    1,136
    Likes Received:
    6,829
    INFINITY NOMADS TUNGUSKA: Spektr (Combi Rifle)
    [​IMG]

    Spektr (Combi Rifle)
    The last straggler from the battle pack (and last Tunguska guy for a while). Simple and fast model to paint. Kept him dark like his teammates but left the white helmet and gauntlets that are kinda iconic on this Nomad mini.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
    redeemer, Vakarian, ev0k and 13 others like this.
  16. Oni

    Oni Well-Known Member

    Joined:
    Jan 18, 2018
    Messages:
    190
    Likes Received:
    511
    Very cool, thank you so much for your guide and your work. Kuroshi will be my practice victim.
     
    archangeleong likes this.
  17. archangeleong

    archangeleong Deadly Ninja Assassin

    Joined:
    Jul 7, 2018
    Messages:
    1,136
    Likes Received:
    6,829
    INFINITY NOMADS BAKUNIN: Reverend Healer (Combi Rifle)
    [​IMG]

    Reverend Healer (Combi Rifle)
    One of my favorite all time Infinity miniatures. This gal is the reason I went into a panic last December and bought the battle pack that was going out of production. Likely this mini will be rereleased in an army box, dang those clever people at CB tricking me into buying more miniatures... Actually I quite like their new sales strategy of battle packs being replaced by army boxes after a year. It makes planning collecting much easier.

    I painted her with more white than my Tunguska guys, which fits in with her role but is also consistent with Bakunin colours. Loved working on her face and spent at least an hour on it alone. Even managed to pull of a sideways glance for once! Lots of freehand too made it quite a tricky mini to finish. I also upped the highlights on her black leggings etc to invoke a more glossy sexy leather fetish vibe to her (probably should have gone all the way to white though). What's the deal with sexy scifi nuns with white hair dressed in leather anyway? I may not be adding much to her sectorial but geewiz I like her a lot.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
    redeemer, Oni, zapp and 12 others like this.
  18. Law Dawg

    Law Dawg Well-Known Member

    Joined:
    Jan 2, 2020
    Messages:
    233
    Likes Received:
    460
    How did you get the white so smooth?
     
    Xeurian and ev0k like this.
  19. archangeleong

    archangeleong Deadly Ninja Assassin

    Joined:
    Jul 7, 2018
    Messages:
    1,136
    Likes Received:
    6,829
    I just use many layers of watered down paint and apply it with wet blends. It takes around 3 to 5 depending on shading.
     
    Berjiz, Law Dawg and Golem2God like this.
  20. archangeleong

    archangeleong Deadly Ninja Assassin

    Joined:
    Jul 7, 2018
    Messages:
    1,136
    Likes Received:
    6,829
    INFINITY NOMADS CORREGIDOR: Alguacils
    [​IMG]
    Alguacils
    Have to admit I'm not a super fan of the look of these line troopers. The Studio ones are painted so red they look like they are wearing prison jumpsuits, the blokes look like they pumped iron but skipped legs day and I think the shoulder pads remind me too much of 40K orks from the 80s. That said, they are an essential Nomad trooper so I had to do my best to make them shine.

    I wanted to keep them mostly red due to their sectorial colours but not do them like the Studio. To this end, I muted the red on their fatigues, which as it turns out harks back to the N1 Alguacils lol! The male models were a bit tricky to assemble as the arms didn't seem to line up well so I had to use quite a bit of greenstuff to make them work. Other than that they were pretty easy to do and I batch painted the lot fairly quickly (but not overly enthusiastically) over a couple of days. They turned out OK I guess and I tried to give them as much personality as possible.

    Alguacil 1 (Combi Rifle)
    AKA Finger Guns Joker Lady
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Alguacil 2 (Combi Rifle)
    AKA Rasta Man Tiny Pants
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]


    Alguacil 3 (Combi Rifle)
    AKA Carrot Top Obligatory Shooting Pose Guy
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    Link Team
    [​IMG]
    [​IMG]
     
    redeemer, Usashi, Croepoek and 7 others like this.
  • About Us

    We are a company founded in 2001 in Cangas (Spain), and devoted to design and manufacture games and figures. Our main product, Infinity the Game, was born with the ambition to satisfy the most demanding audience, offering the best quality.

     

    Why are we here?

     

    Because we are, first and foremost, players.

  • Quick Navigation

    Open the Quick Navigation